The Bugatti U-16 was a 16 cylinder water-cooled aircraft engine designed by Ettore Bugatti in 1915 to 1916 and built in France in small numbers. Two eight-cylinder banks stood vertically side by side on a common cast aluminium crankcase, each bank driving its own crankshaft, and the two crankshafts were geared to a single propeller shaft that was bored to accept a 37 mm gun barrel. The engine completed ten-hour and fifty-hour endurance tests in 1917. The French government bought a licence and arranged production by Peugeot, and the US Bolling Commission bought a licence too, which led to a revised version built by the Duesenberg Motor Corporation as the King-Bugatti, of which probably about 40 were made before the end of the First World War. Neither engine was particularly successful: few were installed in aircraft and even fewer flew. After the war Breguet took over the French licence and developed the engine as the U-24. Surviving examples are on display in museums, including a King-Bugatti at the Smithsonian National Air Museum.
Facts
SignificanceLicensed in 1917 to the French and US governments, built by Peugeot and as the King-Bugatti by Duesenberg. 1 Displacement or Thrust Cylinder Count Classification
Fuel or Cycle Configuration Connections
Exemplifies
Source Bugatti U-16 (Wikipedia)
Invented By
Source Bugatti U-16 (Wikipedia)
Of Make
Source Bugatti U-16 (Wikipedia)
In the Other Atlases
Manufactured By
Also in Business Atlas: the manufacturer of this subject.
Source Bugatti U-16 (Wikipedia)Lead, designerQuote, Lead, designer
The Bugatti U-16 was a 16-cylinder water-cooled double-8 vertical in-line "U engine", designed by Ettore Bugatti in 1915 to 1916 and built in France in small numbers.
Sources
1. Bugatti U-16 (Wikipedia)
Lead, design years
designed by Ettore Bugatti in 1915 to 1916
Lead, cylinder count
The Bugatti U-16 was a 16-cylinder water-cooled
Lead, layout
double-8 vertical in-line "U engine"
Specifications (King-Bugatti), fuel
Fuel type: Petrol
Specifications (King-Bugatti), performance
Power output: 410 hp (306 kW) at 2,000 rpm
Specifications (King-Bugatti), general
Displacement: 1,484.3 cu in (24.3 L)
Design and development
the French government purchased a license and arranged for production by Peugeot
Lead, designer
The Bugatti U-16 was a 16-cylinder water-cooled double-8 vertical in-line "U engine", designed by Ettore Bugatti in 1915 to 1916 and built in France in small numbers.
In Group: Piston Aero Engines, Lead, aircraft engine
The Bugatti U-16 was a 16-cylinder water-cooled double-8 vertical in-line "U engine", designed by Ettore Bugatti in 1915 to 1916 and built in France in small numbers.
Exemplifies: Aviation, Applications
Morane-Saulnier AN, 1918 prototype fighter aircraft
View the SourceReader Challenges (0)
No disputes yet. Spotted an error or a better source? Open the first one.
Sign in to dispute this or suggest a correction.