The Lockheed CL-1201 was a design study by Lockheed in the late 1960s for a very large nuclear-powered transport aircraft of about 6,000 tons, one possible use of which was as an airborne aircraft carrier. The study imagined a tailless crescent-winged aircraft with a wingspan of 1,120 feet, the largest of any airplane, powered by heat from a nuclear reactor passed to four jet engines near the rear, with an estimated endurance of 41 days. At low altitudes the jets would burn conventional fuel, and 182 additional vertical lift engines were needed for take-off. Two variants were studied, a logistics support aircraft that would carry hundreds of troops and their equipment and an airborne aircraft carrier able to carry up to 22 fighters externally and an internal dock for two shuttle aircraft. The Department of Defense does not seem to have records of the outcome, but several sources cite the design.
Facts
Engine Class StatusDesign only (never built) 1 Maximum Mass (kg) Comparison
Body StyleAircraft (no road body style) 1 Connections
Exemplifies
Source Lockheed CL-1201 (Wikipedia)
Of Make
Source Lockheed CL-1201 (Wikipedia)
In the Other Atlases
Manufactured By
Also in Business Atlas: the manufacturer of this subject.
Source Lockheed CL-1201 (Wikipedia)ManufacturerQuote, Manufacturer
The Lockheed CL-1201 was a design study by Lockheed for a large 6,000-ton nuclear-powered transport aircraft during the late 1960s.
Sources
1. Lockheed CL-1201 (Wikipedia)
Lead, body style
The Lockheed CL-1201 was a design study by Lockheed for a large 6,000-ton nuclear-powered transport aircraft during the late 1960s.
Lead, status
The Lockheed CL-1201 was a design study by Lockheed for a large 6,000-ton nuclear-powered transport aircraft during the late 1960s.
Design, engines
transferred to four jet engines near the rear
Lead, energy source
The Lockheed CL-1201 was a design study by Lockheed for a large 6,000-ton nuclear-powered transport aircraft during the late 1960s.
Specifications, gross weight
Gross weight: 11,850,000 lb (5,375,000 kg)
Manufacturer
The Lockheed CL-1201 was a design study by Lockheed for a large 6,000-ton nuclear-powered transport aircraft during the late 1960s.
Exemplifies: Aviation, Lead, mode
The Lockheed CL-1201 was a design study by Lockheed for a large 6,000-ton nuclear-powered transport aircraft during the late 1960s.
Of Make: Lockheed Corporation, Lead, make
The Lockheed CL-1201 was a design study by Lockheed for a large 6,000-ton nuclear-powered transport aircraft during the late 1960s.
View the SourceReader Challenges (0)
No disputes yet. Spotted an error or a better source? Open the first one.
Sign in to dispute this or suggest a correction.