The 7E is a 60 hertz industrial gas turbine built by GE Vernova and sold today as the 7E.03. It is aimed at peaking, cyclic and baseload plants as well as liquefied natural gas and cogeneration sites, where its exhaust heat is used to raise steam. The maker rates it at about 90 MW in simple cycle and better than 52 percent efficiency in combined cycle, with NOx below 4 ppm without a catalytic reducer, and says it can reach full load in under ten minutes. A multiple-fuel combustion system lets operators switch fuels while running under load. The 7E carries a long history: the first E-class machine, a 7E, was put into service at the Shoreham Combustion Turbine plant in New York in 1971, and GE Vernova now counts a worldwide 7E fleet of more than 90 GW running in over 27 countries, with more than two million starts.
Facts
Classification
Fuel or Cycle Connections
Of Make
Source 7E gas turbine (GE Vernova)
In the Other Atlases
Manufactured By
Also in Business Atlas: the manufacturer of this subject.
Source 7E gas turbine (GE Vernova)Fleet, makerQuote, Fleet, maker
installed GE Vernova 7E gas turbines
Sources
1. 7E gas turbine (GE Vernova)
Specifications note, fuel
All ratings are based on ISO conditions and natural gas fuel.
Fleet, maker
installed GE Vernova 7E gas turbines
In Group: Heat Engines, Lead, kind of engine
The 7E.03 gas turbine is recognized as an industry leader for 60 Hz industrial power applications.
View the Source2. POWER Magazine: A Brief History of GE Gas Turbines
POWER MagazineTimeline, 1971Quote, Timeline, 1971
The first E-class (a 7E) is debuted at National Grid’s Shoreham Combustion Turbine plant in New York.
View the Source Reader Challenges (0)
No disputes yet. Spotted an error or a better source? Open the first one.
Sign in to dispute this or suggest a correction.