A free-turbine turboshaft is a kind of gas turbine engine, used as a turboshaft or turboprop, in which an independent power turbine behind the gas generator takes power from the exhaust stream. That turbine is not mechanically linked to the turbines that drive the compressors, which is why it is called free, and it can run at a different speed from them. This suits varying loads such as propellers, and it means no clutch is needed, so the gas generator can start while the output shaft stays still. The first free-turbine gas turbine engine was the Bristol Theseus turboprop, which first ran in July 1945. Most turboshaft and turboprop engines now use free turbines, notably in helicopters and also in marine propulsion and static power generation, and the PT6, of which over 50,000 have been produced, is a common small example. A free turbine arrangement can overspeed if its gearbox fails, as happened in the 1954 accident of the second Bristol Britannia prototype.
Facts
Classification
Fuel or Cycle Connections
Exemplifies
Source Free-turbine turboshaft (Wikipedia)
Sources
1. Free-turbine turboshaft (Wikipedia)
Design
which is modelled using the Brayton cycle
Applications, Aircraft
It first ran in July 1945
In Group: Turbojet and Turbofan Engines, Lead
a form of turboshaft or turboprop gas turbine engine where the power is extracted from the exhaust stream of a gas turbine by an independent turbine
Exemplifies: Aviation, Applications, Helicopters
Helicopters are a major market for turboshaft engines.
Part Of: Westland Wessex, Applications, Helicopters, Wessex
For the Wessex, this was used to give a particularly fast take-off from a cold start.
View the SourceReader Challenges (0)
No disputes yet. Spotted an error or a better source? Open the first one.
Sign in to dispute this or suggest a correction.