The exoskeletal engine, often shortened to ESE, is a concept in gas turbine design that turns the conventional layout inside out. Ordinary gas turbines carry their rotating blades on a central shaft and discs, are built mostly from heavy metals, need lubricated bearings and extensive cooling of hot parts, and risk disc bursts. In the exoskeletal design the blades are fixed to the inside of a rotating drum, and four concentric open ended shells make up the engine: an outer casing that holds the bearings, the drum rotor that carries the compressor and turbine blades, a static stator shell that carries the guide vanes, and a hollow inner shell that gives a flow path through the centre. The blades work mainly in radial compression, which allows brittle materials such as ceramics that suit higher temperatures and lower weight. The central cavity could cut noise on subsonic aircraft or house a ramjet or scramjet in a combined cycle engine. The main open challenge is bearing design, since no known lubricated system can handle the speeds involved and foil and magnetic bearings are only suggested solutions.
Connections
Exemplifies
Source Exoskeletal engine (Wikipedia)
Sources
Exoskeletal engine (Wikipedia)
In Group: Turbojet and Turbofan Engines, Lead
Current gas turbine engines have central rotating shafts and fan-discs
Exemplifies: Aviation, Design
The use of ceramics would also be a beneficial feature for hypersonic propulsion systems
View the SourceReader Challenges (0)
No disputes yet. Spotted an error or a better source? Open the first one.
Sign in to dispute this or suggest a correction.